active-loop

SDR with Active Antennas for HF

A couple of weeks ago I started to gather my first experiences with software defined radios (SDR) and active antennas. I started with low investment, using the RTL SDR dongle, but I quickly realized that using the direct sampling mode for HF is not an ideal solution and added the Spyverter HF up-converter.

For my first trials I used a Mini Whip from RA0SMS as antenna, but the results were quite disappointing.

mini-whip

Finally, I ended up with an active loop antenna (see featured image), using the Cross-country Wireless Loop antenna pre-amplifier (10 kHz to 30 MHz version). The pre-amplifier is powered with 13.8 V via a bias-tee. Common mode chokes on the antenna line and all power lines helped to reduce noise, especially on the low bands. This is final hardware setup setup:

The setup is now running 24/7 on a Raspberry Pi 3B+ using GQRX and WSJT-X. I was surprised, how many stations and countries can be decoded down to 80 and 160 m.

PSK-80m

Further Information

Talk given during SARTS monthly meeting

PSK reporter link to stations currently received by 9V1KG

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.