Presentation of my FT-818 go kit and portable operation to Coron, Palawan on the February SARTS monthly meeting.
Finished the setup of my portable station. All components are mounted together using maker beam profiles: FT-818, PA MX-P50M, ATM Z817, Solar charge controller and Computer interface.
Today I tested the first time my new solar power setup for portable operations. I am using a 60 W PowerFilm foldable solar panel and a 5 A MPPT charge controller for a LiFePo4 4S battery. The whole weight is 1600 g including the 5 m connection cable.
It was cloudy day and the sun was most often covered by clouds. The panel is only exposed to 1/3 up to max. 1/2 to the full sunlight, if it is there.
Using a power analyzer, the data show a 1.4 A peak current and 19 W peak power. I was able to charge 10 Wh in about 2 hours. Next time I will try to get the panel under full illumination in the sun and measure again.
The analyzer shows current, voltage and power and in addition peak values for current and power as well as total energy (power integrated over time) in Wh.