For my VHF/UHF station I am using a dual band five element log-per antenna, similar to the Elk log-per. It is actually an ideal antenna for portable use, as it can be assembled and disassembled easily and packed in a small size. Now the idea came up to use it for satellite communication with my FT-818. The only thing missing was a azimuth/elevation rotator to track the satellites.
I started with my own design, using a stepper motor for azimuth and a servo for elevation. After a while I cancelled the project, as I had too many problems with electromagnetic interference to the servo.
Searching for an alternative DIY solution, I came across the SARCNET website, and the mini satellite antenna rotator MK1.
I decided to build it, but to separate motors and electronics; purchased the parts and started the 3D print design. Below the details and the final result.
When I first time applied power to the motor drivers, the following happened with a loud bang! Luckily, it was outdoor on my balcony.
My thanks to SARCNET, the software works w/o problems. I only had another EMI problem, which could be solved finding a well screened micro USB cable and adding a few ferrites.